Ch3snas streaming xbox360 funplug 0.5 ushare

All i wanted !

Funplug 0.5 working with Ushare!

Credits to Rimblock~!

http://forum.dsmg600.info/viewtopic.php?id=2619&p=1

Install funplug 0.5
http://www.inreto.de/dns323/fun-plug/0.5/
Download the 2 files and put them in the root of your ch3snas,
reboot your nas.
Wait 3 minutes then the funplug will be installed.

Download the ushareverion of rimblock from http://dns323.thecorewithin.net/ to the root of your nas.

Open a telnet session to your ch3snas.
Once your in telnet
cd /mnt/HD_a2/
Then your in your root of your ch2snas

Unpack the downloaded ushare version.
using command
tar -xzvf ushare1.1a-fw1.5-ffp0.5-no_dlna.tgz

open the new directory
cd ushare1.1a-fw1.5-ffp0.5-no_dlna/
and run ./install.sh

the config file(/ffp/etc/ushare.conf) point's to \HD_a2\Share\Media\
If u want to change the location change the config file edit the file in notepad++ .

Reboot the nas and your media is visible on your xbox360 :)

Note that this does not work for the Playstation 3.

Ch3snas xbox360 streaming

okok i was a little to fast with my design... i thought i could hook up my xbox360 to my wlan and stream directly from the nas...
NOT,..... well not in the first place.

There is a workaround founded on this forum.
Finally-enjoy-video-streaming-xbox360

And it works like a charm :D gonna watch WMV kongfu panda!
The plugin is based on Funplug 0.4.


Install fonz's fun_plug 0.4 by downloading funplug-0.4.tar.gz from
Funplug 0.4
Unrar the files(fun_plug and fun_plug.tar) and place these in the root of your Ch2snas.

Reboot the Snas via the webconsole or 5 seconds powerdown on the device itself.
Wait untill its up again. The volume will have an fun_plug.d directory.

Till now only funplug is installed. Now Ushare!

Download
ushare-1.1a-fun-plug.tgz Its listed in the post.

Place the file in the root of the Ch3snas.

Telnet to the Ch3snas.

cd /mnt/HD_a2/

Then run the command

funpkg.sh ushare-1.1a-fun-plug.tgz (ushare-1.1a-fun-plug.tgz which u have placed in the root before)

Restart your Ch3snas.

U can edit the config file in the etc directory

Ch3snas Going to test.

There is a " known" problem of data loss in the ch3cnas.

The words are that u loose data when u connect a new disk in the device.
It ask's to format but it formats the wrong drive accoding to people.

There is some workaround but then u have to shut down the device and put in the new disk.. and thats not what u want when u have a raid1 configuration. :)

Going to test.

Install w2k3 64x on T7400

After 2 hours... we managed to install a w2k3 64x OS on a DELL T7400.

The internal SAS raid was blocking the installation.
Finally we used the W2k3 driver Dell SAS 6/iR Integrated driver of the Poweredge 1950to install the raid controller on the T7400 machine. There are no server drivers on the dell website for the T7400, u will have to download it from the poweredge 1950.
Placed it on a floppy and loaded the driver into windows setup(F6).

CH3SNAS NAS

CH3SNAS tweaks and tricks


http://knowledge.forestblue.nl/ch3snas.html

http://nas-tweaks.net/CH3SNAS:Tutorials

Tweakers topic
http://gathering.tweakers.net/forum/list_messages/1284778/0

Telnet To CH3SNAS explained on
http://wiki.dns323.info/howto:telnet
Funflugs
http://wiki.dns323.info/howto:fun_plug
http://www.inreto.de/dns323/fun-plug/

Home network

This is my network design. Its not really perfect but its ok for now.

the bottleneck is still my wrt94g but hey i can stream my music and vid files :)

Mighty dump truck

Searching and searching... But cant find a good
TONKA mighty dump truck... in the netherlands....

http://www.calhounstreetemporium.com/servlet/Detail?no=112
http://cgi.ebay.com/Vintage-1969-Tonka-Diesel-Pressed-Metal-Dump-Truck_W0QQitemZ220328467431QQcmdZViewItem

home network plan

Maybe a usefull thing on my home network plan..

How to set Access Point mode on DD-WRT
In order for this tutorial to work, you need to have the latest v24 Release Candidate 7.
To set it up as repeater do the following:
Do a 30 second reset
Under wireless->basic settings:
Wireless mode: AP
Wireless Network Name (SSID): Your prefer SSID
Wireless Channel: Your prefer channel ( Use channel with less interference from other access point)
Save Settings
Under Wireless > Wireless Security
Physical Interface wl0 enter the necessary settings to connect to the wlan you'd like to repeat (if none, select disabled)
Under Setup->Basic Setup:
Under WAN Connection Type:
Connection Type : Disabled
STP : Disable
Under Router IP:
Local IP address :Set your IP your address to a same subnet of your main router (if your main router IP is 192.168.1.1, set it to same subnet like 192.168.1.2)
Subnet Mask : same as your main router subnet
Gateaway : Your main router IP
DNS : Your main router IP
Under Network address Server Setting (DHCP)
DHCP Type : DHCP Forwarder
DHCP Server : Your main router IP
Time settings : disable
Save Settings
Under Security Tab
Un-check all items in the "Block WAN Request" section
Then disable the SPI firewall
Save Settings
Under Administration Tab
Enter all other necessary information, remember to change your password
Click the Save button
Then click Reboot button

Xbox360 Harddisk flash

Just received my ebay item from canada today.
A broken 20GB harddisk for the Xbox360.

Bought a new 120GB harddisk for it and flashed the harddisk to a xbox360.

So for 50 Euro i got a working 120GB Xbox360 disk.
Okok after i bought the drive there was a price drop from120 Euro to 70 euro for a new one... so the time vs cost... ah well :)

Use Windows Bluetooth Module Dell issue M4300

We have an issue with the bluetooth drivers provided by dell... Random bsod no good connection etc.

You can solve it by using the bluetooth driver from windows as this is standard installed from windows xp sp2 and later. But windows does not recognize all the modules.
Here is how to fix it.

Using the Microsoft Bluetooth Stack
1 Uninstall alle current Bluetooth drivers


Example!: i want to add ebluetooth device called
Dell Bluetooth with vendor USB\Vid_413C&Pid_8140

Edit the %windir%\inf\bth.inf
Add under the section a new device.

;----------------------- Device section - Start -----------------------
[ALPS.NT.5.1]
ALPS Integrated Bluetooth Device= BthUsb, USB\Vid_044e&Pid_3005
Alps Bluetooth USB Adapter= BthUsb, USB\Vid_044e&Pid_3006

Dell Bluetooth with vendor USB\Vid_413C&Pid_8140


Save and exit. And the device will take the standard Bluetooth driver from windows